Skip to main content

MODCOD planning from forecast SNR

MODCOD is the modulation and coding pair a link uses, such as QPSK with rate 1/2 coding or 16APSK with rate 3/4. A higher MODCOD carries more bits per symbol but needs more SNR to decode. Planning MODCOD per pass means using the high ones where the link can hold them and the sturdier ones where it cannot.

CCM, VCM and ACM​

ModeHow MODCOD is chosenWhat it needs
CCM, constantOne MODCOD for the whole passA MODCOD that closes at the worst point of the pass
VCM, variableA schedule of MODCOD changes fixed before the passA forecast of SNR through the pass
ACM, adaptiveChanges in real time from receiver feedbackA return link, and a good starting point

Why forecasts help​

SNR changes through a pass. At low elevation the slant range is longest and the path crosses the most atmosphere; near the peak it is shortest. Weather adds its own loss on top. A single MODCOD sized for the ends of the pass wastes the middle, and one sized for the middle drops lock at the ends.

The modcod-plan workflow​

The modcod-plan template produces a time-tagged MODCOD schedule for each pass from its SINR at each step. Each item carries a series of every MODCOD change and when, with the SINR behind it. See Items.

  • In OpenC3 COSMOS, the MODCOD packet holds the next pass's changes, the MODCOD at AOS and LOS and the lowest planned SINR.
  • In Yamcs, the plan arrives as a timeline item for the pass.

To build a plan yourself, ask Link SNR for several times across the pass, at least AOS, peak elevation and LOS, and pick the highest MODCOD that closes at each with your margin.

Common questions​

What is the difference between CCM, VCM and ACM?

CCM uses one MODCOD for the whole pass. VCM follows a schedule of MODCOD changes fixed before the pass. ACM changes MODCOD in real time from receiver feedback. VCM needs a forecast of SNR through the pass; ACM benefits from one as a starting point.

What SNR does each MODCOD need?

The threshold depends on the standard, frame length and the implementation margin of your modem. Use the thresholds your modem vendor publishes for each MODCOD, plus your own margin.

Is SINR the same as SNR?

SINR adds interference to the noise in the denominator, so it is never higher than SNR. Workflows compute SINR in their own step before capacity and MODCOD planning.

Next: run modcod-plan on the demo fleet and read a pass's schedule.