RF interference monitoring for satellite links
RF interference (RFI) is unwanted energy in your receiver's band: another satellite near your line of sight, the Sun behind your satellite, a terrestrial emitter, or deliberate jamming. It shows up as SNR you lose that geometry and weather do not explain.
Where interference comes from
| Source | When it bites |
|---|---|
| The Sun | When the Sun sits near the antenna beam, its noise floods the receiver. Predictable from geometry. |
| The geostationary arc | When a non-geostationary satellite passes close to the GSO arc as seen from the antenna |
| Adjacent systems | Other satellites or networks on overlapping frequencies near your line of sight |
| Terrestrial emitters | Ground transmitters near the station on or near your band |
| Jamming | Deliberate interference, often intermittent and hard to tell from fading |
Telling interference apart from weather and geometry
Interference is what is left after you account for everything else. Forecast the link's SNR with Link SNR and the weather loss with Weather attenuation, then compare with the es_n0_db you measured over the same pass, read back through series reads. A shortfall that persists while the weather model reports little loss is worth investigating.
What Constellation serves
- The RF interference model estimates, per link and time, the SNR lost to added noise (
rfi_penalty_db), the chance of interference (p_interference) and what that chance rests on (p_interference_basis), and the Sun's, the Moon's and unexplained shares of that noise (sun_noise_db,moon_noise_db,unknown_noise_db). - The
rfi-watchworkflow template lists links with interference past a threshold, sampled every 60 seconds over the next hour, with their lock-loss risk and a reroute to suggest, where the RF interference model is served.
The model is served to every self-serve account. The rfi-watch template, like every workflow with a model lane, needs Operator.
Common questions
What is a sun outage?
A sun outage happens when the Sun passes close to the line between the antenna and the satellite. The Sun is a strong noise source, so the link loses SNR for minutes at a time. Because it follows from geometry, it can be predicted.
Can I get RF interference forecasts from Constellation today?
Yes. The RF interference model is served to every self-serve account.
How do I spot interference in my own telemetry now?
Send link telemetry with measured Es/N0, then compare it against the Link SNR forecast and the weather attenuation terms for the same times. A persistent shortfall under clear skies points to something other than weather or geometry.
Related
- RF interference model card
- Satellite link budget basics
- Space situational awareness for operators
- Satellite and ground station telemetry API