Skip to main content

Rain fade and weather attenuation at ground stations

Rain fade is the loss of signal when raindrops between a ground station and a satellite absorb and scatter the radio wave. It grows with frequency: small at S band, larger at X and Ku band, and at Ka band a heavy rain cell can take a link below the level its modem needs.

The four terms of weather attenuation​

TermCauseNotes
RainDrops along the path below the rain heightUsually the largest term above 10 GHz, and the one that changes fastest
GasOxygen and water vapourNear 22.235 GHz, the water vapour line, it is close to its worst
CloudLiquid water in cloudsSmaller than rain, present more often
ScintillationFast fluctuations from turbulenceStrongest at low elevation

ITU-R P.618 combines the four into the total loss on the path. Elevation matters for every term: a low pass crosses more atmosphere, and more of the rain below the rain height.

How to forecast rain fade per pass​

A climate statistic says how often rain of a given size falls at a site. A forecast says whether it will fall on your pass. The Weather attenuation model uses the best source available for how far ahead you ask:

How far aheadRain source
Up to about 20 minutes (15 in Europe)The latest radar scan, where radar covers the station
Up to 3 hoursA radar nowcast, where radar covers the station
Up to 72 hours after the newest model runWeather-model forecasts
Beyond thatA draw from the site's long-term rain distribution, a planning figure only

Radar coverage today is the contiguous US and Europe. Each result says which source it used in rain_source and how far ahead it reached in rain_lead_min. See Where the rain comes from.

curl --fail-with-body -sS \
-H "x-api-key: $CONSTELLATION_API_KEY" \
"https://api.constellation.space/predictions?model_family=weather-attenuation&ground_station_id=singapore-teleport&satellite_id=norad-54234&at=$(date -u -v+1H +%Y-%m-%dT%H:%M:%SZ 2>/dev/null || date -u -d '+1 hour' +%Y-%m-%dT%H:%M:%SZ)"

The IDs are the demo fleet's tropical Ka band teleport and NOAA 21; put an at in the future. The model needs no telemetry. It reads your network config and fills any missing antenna field from a default for the link's band, listing each one in assumptions.

Acting on a rain forecast​

The rain-fade-swap workflow template finds passes where the weather lane, at its p50 (the median), costs more than 30% of what the pass would carry in clear sky, and names a backup pass to book before the cancel deadline. The swap reaches operators where they already work:

  • In Yamcs, as a WARNING event.
  • In OpenC3 COSMOS, as the SWAP packet with the minutes left to act.
  • In Anduril Lattice, as a caution alert and a hazard circle over the station.

To ask what a fade would cost before it happens, add extra fade in dB to an antenna with a scenario and run a workflow against it. A scenario run never delivers.

Common questions​

At what frequencies does rain fade matter?

Rain loss is small at S band and grows with frequency, which is why Ku and especially Ka band links need either a large fade margin or a plan for rain. The ITU-R rain method is defined from 1 to 55 GHz.

How far ahead can rain fade be forecast?

Where radar covers the station, the first minutes come from the latest scan and a nowcast reaches about 3 hours. Weather-model forecasts reach 72 hours. Past that, the rain term is a draw from the site statistics, useful for planning but not a forecast of that pass.

Does the weather attenuation model need my telemetry?

No. It reads your network config and weather data only, so it is as good on the first request as on the hundredth.

What is the difference between rain fade and scintillation?

Rain fade is absorption and scattering by raindrops along the path. Scintillation is a fast fluctuation in signal strength caused by turbulence in the atmosphere, strongest at low elevation. The model reports each as its own term.

Next: load the demo fleet, whose Singapore teleport is where rain costs the most, and see which passes rain-fade-swap flags.